Tesla Cybertruck · Assassin Red Color PPF, Ceramic Tint + Coat

Tesla Cybertruck Assassin Red Color PPF, Ceramic Tint, Ceramic Coating — photo 1 — Hussle Customz Los Angeles

Tesla Cybertruck Assassin Red Color PPF, Ceramic Tint, Ceramic Coating — photo 2 — Hussle Customz Los Angeles

Tesla Cybertruck Assassin Red Color PPF, Ceramic Tint, Ceramic Coating — photo 3 — Hussle Customz Los Angeles

Tesla Cybertruck Assassin Red Color PPF, Ceramic Tint, Ceramic Coating — photo 4 — Hussle Customz Los Angeles

Tesla Cybertruck Assassin Red Color PPF, Ceramic Tint, Ceramic Coating — photo 5 — Hussle Customz Los Angeles

About this build

This Tesla Cybertruck came through our Los Angeles studio as an electric platform build — EV-specific spec considerations come into play: glass curvature, charge-port edges, and the way battery heat moves through the cabin all factor into the install plan. Gloss keeps the factory-paint depth front-and-centre while the color shift carries the look. Multi-service builds are sequenced deliberately — one finish has to fully cure before the next one goes on top, so the schedule reflects that order.

A Tesla Cybertruck in Assassin Red gloss color PPF — a deep metallic red that reads almost black in the shade and glows red in the sun. Each angular panel gets its own film section, with edges wrapped at the panel gaps. Ceramic tint and a ceramic coating complete the build.

See more color PPF Cybertrucks, like the gloss black PPF build.

See our ceramic coating work · Read our Color PPF explainer

What we used on this Tesla

Premium 8 mil color PPF — self-healing urethane with a ceramic-infused topcoat. Matte, gloss, and color variants available; plotter-cut from a digital pattern for the exact body panel. Pigmented top layer fuses paint protection with a color change in one film, so the underlying factory paint stays untouched.
Premium ceramic window film — 99% UV rejection, ~80% IR heat rejection on darker shades, no metallic layer (so phone, GPS, and cabin radar stay clean). Plotter-cut, never hand-cut on the glass.
Professional SiO₂ ceramic coating — 9H surface hardness, hydrophobic, multi-year durability when paired with our prep wash and clay-bar decontamination.

Why these finishes were combined

Tesla builds with several finishes work when each layer is planned in sequence: paint protection film keeps the exterior factory-perfect against road debris and UV, while ceramic tint cuts the heat soak that California sun pushes into a closed cabin; PPF stops the impact and chemical hits, ceramic coating sits on top so washing the car takes a fraction of the time and grime does not bake in.

What to expect after the install

PPF cure window: avoid pressure-washing the wrapped panels for the first 7 days. Hand-wash only for the first 30 days. Properly cared for, the film holds its self-healing properties for 8–10 years.
Ceramic tint cure: keep the windows up for 3–5 days while the film fully dries. Small water pockets are normal during cure and disappear on their own. Lifetime film warranty.
Ceramic coating maintenance: first wash at 7 days, then a regular pH-neutral wash every 2–3 weeks keeps the hydrophobic layer active for the rated lifespan.

Every Tesla build at our Los Angeles studio includes a written aftercare brief and direct text-line access to the installer for the first month. Questions about your specific build — get a quote or call (626) 537-3333.